Navistar WorkStar Series User Manual

Controls/Features
Quadrant 2 – Display
Messages
Description Flash (Yes/No) Warning Indicator
Association
PARKD REGEN ACTIVE Message is displayedduringaparkedregeneration. No No
Load Shedding Message is displayed when electrical load control and
shedding feature is implemented.
Yes No
Washer Fluid Low Indicates low washer fluid level. Yes No
Electrical Fault When instrument panel gauge cluster’s ability to display
diagnostic codes is enabled, this message is displayed
when there are active diagnostic codes.
Yes No
Check A/C Indicates a fault in the HVAC System. Yes No
PARKD REGEN INHIBITED Message is displayed when parked regeneration has been
requested, but is not performed due to a vehicle interlock
or an engine fault.
No No
Air Filter Restriction Message displayed indicates restricted air flow to the
engine.
Yes No
Exterior Lamp Check Active Message displayed indicates Exterior Lamp Check is in
progress.
Yes No
HVAC Temp Setting Bar graph displayed show temperature setting in low to
high increments.
No No
Activate HVAC Front Blower Bar graph displayed show blower speed setting in Off and
low to high increments.
No No
62 3879634R1

Navistar WorkStar Series Specifications

General

Brand	Navistar
Model	WorkStar Series
Category	Trucks
Language	English