Navistar WorkStar Series User Manual

Controls/Features
Quadrant 2 – Display
Messages
Description Flash (Yes/No) Warning Indicator
Association
HVAC Sleeper Blower Speed Bar graph displayed show blower speed setting in Off and
low to high increments.
No No
Air Pressure Diagnostic Yes No
Cruise Indicates that the Cruise Control System is turned On. No No
Fuel Filter Indicates that the fuel filter is clogged. Yes No
Check Brake Switch Yes No
Check Pupil Warning Indicator Yes No
Check Stop Arm/Crossing Gate Yes No
Check Exterior Lamps Yes No
Engine Control Shutdown Yes No
Check Trailer Lights Yes No
Engine Control System Error Yes No
PARKD REGEN REQUIRED Indicates parked regeneration is necessary. No No
PARKD REGEN INHIBITED
ENG TMP
Message is displayed when engine coolant temperature is
below 170° F (76.6°C).
No No
REGEN INHIBIT SWITCH
ACTIVE
Message is displayed when Regen Inhibt Switch is “On”
and regeneration Is disabled.
No No
PARKED REGEN AVAILABLE No No
Low Coolant Level Message is displayed when coolant level is less than or
equal to 80%.
Yes No
3879634R1 63

Navistar WorkStar Series Specifications

General

Brand	Navistar
Model	WorkStar Series
Category	Trucks
Language	English