7167 Owner’s Manual Chapter 6: Commands
November 2003
100
Command Description
Difference between a
7156 and a
7167 configured in 7156 Emulation
Mode.
1B 59 n1 n2 d1...dn Select Double-Density
Graphics
In 7156 Emulation Mode, the
printer scales the graphics to
provide the best match.
1B 5C n1 n2 Set Relative Print Position The parameter to this
command is in units of dots.
However, the command
moves and aligns to
character positions. In 7156
Emulation Mode, this
command calculates how
many character positions to
move based on the 7156’s
character width in dots (10)
versus the 7167’s width (13).
1B 61 n Select Justification This command does true dot
resolution alignment for
centering versus character-
aligned centering.
1D 2A n1 n2 d1...dn] Define Downloaded Bit
Image
In 7156 Emulation Mode,
this command scales the
incoming data to provide a
best match to the size of the
image as it printed on the
7156 printer.
1D 2F m Print Downloaded Bit Image (Same as above)
To Next Page
Loading...
