NCR 7167 - Page 179

7167 Owner’s Manual Chapter 6: Commands
November 2003
166
Transmit Printer ID
ASCII
GS I n
Hexadecimal
1D 49 n
Decimal
29 73 n
Value of n
1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo definition
Transmits the printer ID specified by n as follows:
N Printer ID Specification ID (hexadecimal)
1, 49 Printer model ID NCR 7167 0xA1 (7167 Native Mode)
1, 49 Printer model ID NCR 7158 0x28 (7158 Native Mode)
1, 49 Printer model ID NCR 7156 0x26 (7156 Emulation)
1, 49 Printer model ID NCR 7150 0x02 (7150 Mode)
2, 50 Type ID Installed options Refer to the table below
3, 51 ROM version ID ROM version 0x00
4, 52 Logo Definition Logo Definition Refer to table below
Type ID (n=2)
Bit Off/On Hex Decimal Function
0 Off 00 0 No two-byte character code installed.
On 01 1 Two-byte character code installed.
1 Off 00 0 No knife installed.
On 02 2 Knife installed.
2 - - - Undefined
3 Off 00 0 No MICR installed.
On 08 8 MICR installed.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.