NCR 7167 - Chapter 4: Diagnostics

7167 Owner’s Manual Chapter 3: Solving Problems
November 2003
36
3. Scroll back up to “Ports.”
You should see a COM number and port description for the NCR printer.
If the devices are missing or are not listed correctly, the installation wasn’t successful. You will need
to reinstall the drivers.
Windows NT:
Go the Windows Start button and select Programs > InsideOut Networks Utilities > Edgeport
Configuration Utility. A window opens that contains the name of the printer, and the port
assignment.
If this information is not listed, then the installation was not successful. You will need to reinstall the
drivers.