7167 Owner’s Manual Chapter 4: Diagnostics
November 2003
69
Press the Paper Feed Button for the paper width option you want.
** SET PAPER WIDTH ?
YES -> Long Click
NO -> Short Click
Paper Width = 80 mm* -> 1 Click
Paper Width = 58 mm -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Knife Option
This option makes it possible to set the Knife Option if it is installed in the printer. This
setting should only be changed is the option is added or removed.
Press the Paper Feed Button for the option you want.
** SET KNIFE OPTION ?
YES -> Long Click
NO -> Short Click
Enable Knife* -> Long
Disable Knife -> Short
Note: Press the Paper Feed Button for at least one second to validate the selection.
MICR Option
This function makes it possible to set the MICR Option if it is installed in the printer. This
setting should only be changed if the option is added or removed.
Press the Paper Feed Button for the option you want.
** SET MICR OPTION ?
YES -> Long Click
NO -> Short Click
Enable MICR* -> Long
Disable MICR -> Short
Note: Press the Paper Feed Button for at least one second to validate the selection.
Check Flip Option
This function makes it possible to set the Check Flip Option if it is installed in the printer.
This setting should only be changed if the option is added or removed.
To Next Page
Loading...
