NCR 7167 - Page 84

7167 Owner’s Manual Chapter 4: Diagnostics
November 2003
72
Code Page 858 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page 860 -> 1 Click
Code Page 862 -> 2 Clicks
Code Page 863 -> 3 Clicks
Code Page 864 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page 865 -> 1 Click
Code Page 866 -> 2 Clicks
Code Page 874 -> 3 Clicks
Code Page 1252 -> 4 Clicks
More Options -> 5 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Code Page Katakana -> 1 Click
Code Page 932
*
-> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
FOR 7156 Mode:
Code Page 437* -> 1 Click
Code Page 850 -> 2 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
For Asian code pages*, code page 936, 949 or 950 replaces code page 932 in the above
shown menu. Only one Asian code page (Either 932, 936, 949 or 950) will exist in
firmware.
Save Parameters
This function allows to save the selected default code page selecton or return to the default
code page selecton to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click
*
Not supported by 7167-1035 and 7167-2035