7197 Owner’s Guide Chapter 7: Reflashing the Printer Firmware
November 2002
185
TseFlash.com /7167 /m /COM8 /115200 /none /1 BV0293.MFW
This invokes the GUI interface shown in the next section, and displays a progress bar
indicator as you would see if you had run the program through the GUI.Windows GUI
Printer Firmware Update Utility
The printer firmware can be updated from the host terminal, a laptop, or a PC by
executing the TSEFlash.exe utility. There are two file formats for the flash
firmware, IPL which is for the Initial Program Load (Boot) and the MFW, Main
FirmWare.
Examples of the firmware are:
BI0016.ipl 7167 boot firmware
BVO2.93mfw 7167 firmware
As noted this is an example and firmware version will vary as updates are
provided.
These instruction show how to reflash a 7167 printer. However the same
instructions can be used for reflashing the 7197 or 7401-K590 printers as well by
selection the appropriate printer in the Change Mode button.
Unzip the flash utility (Flash311) and the flash files that you will be using into a directory on your
hard disk.
To Next Page
Loading...
