Chapter 4: Diagnostics 7197 Owner’s Guide
DFebruary 2002
54
** SET PRINTER ID MODE ?
YES -> Long Click
NO -> Short Click
7194 Native ID* -> 1 Click
Emulated Printer ID -> 2 Clicks
7167 Native ID -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection
Default Lines Per Inch
This function allows the user to set the default lines per inch printed by the thermal printer
to 6, 7.52 or 8.13. (See “Configuring the Printer” for instructions on how to enter the
Configuration Menu to change this setting.)
Press the Paper Feed Button for the lines per inch you want.
** SET DEFAULT LINES PER INCH ?
YES -> Long Click
NO -> Short Click
8.13 Lines per Inch -> 1 Click
7.52 Lines per Inch* -> 2 Clicks
6 Lines per Inch -> 3 Clicks
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Carriage Return Usage
This function allows the printer to ignore or use the Carriage Return (hexadecimal 0D)
command depending on the application. Some applicatons expect the command to be
ignored while others use the command as a print command. (See “Configuring the
Printer” for instructions on how to enter the Configuration Menu to change this setting.)
Press the Paper Feed Button for the carriage return usage you want.
** SET CARRIAGE RETURN USAGE ?
YES -> Long Click
NO -> Short Click
Ignore CR -> Long Click
Use CR as Print Cmd* -> Short Click
Note: Press the Paper Feed Button for at least one second to validate the selection.
To Next Page
Loading...
