7197 Owner’s Guide Chapter 4: Diagnostics
November 2002
55
Asian Mode
This function makes it possible for the user to select an Asian character for the printer. (See
“Configuring the Printer” for instructions on how to enter the Configuration Menu to
change this setting.)
Note: For Asian code pages, only one (either 932, 936, 949 or 950) will exist in the
firmware.
Press the Paper Feed Button for the asian mode you want.
** SET ASIAN MODE ?
YES -> Long Click
NO -> Short Click
Asian Mode On -> Long Click
Asian Mode Off* -> Short Click
Note: Press the Paper Feed Button for at least one second to validate the selection.
Receipt Synchronization Mode
The standard mode for synchronization allows for verification of each line printed to the
host. When the receipt synchronization is disabled the printer will allow for maximum
print speed and ignore the verificaiton of each line printed.
Press the Paper Feed Button for the receipt synchronization mode option you want.
** SET RECEIPT SYNCHRONIZATON MODE ?
YES -> Long Click
NO -> Short Click
Enable Receipt Sync.* -> Long Click
Disable Receipt Sync. ->Short Click
Note: Press the Paper Feed Button for at least one second to validate the selection.
Save Parameters
This function allows to save the selected emulations/software settings or return to the
emulations/software settings to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES -> Long Click
NO, MODIFY -> Short Click
To Next Page
Loading...
