Call Waiting
During a call, another received call is announced by a beep tone in the earpiece and an
incoming message on the screen. To use call waiting from the Call in progress screen when you
hear the beep tone:
* Press Softkey 1 to answer the new call and automatically place the current call on hold.
Press Softkey 1 (Accept) to answer the call or Softkey 2 (Reject) to reject it. In addition,
pressing SEND will accept the call and END will reject it as well.
To merge the two calls, press Menu (Options Menu) and 5 to add the new call into a
conference with the first call (see page 37).
Press END to end the highlighted call.
Mute a Call
To mute a call using the Phone function Options menu from the Call in progress screen,
* Press MENU (Options Menu) and 2 or press and HOLD (Asterisk Symbol) key to mute
the call.
Press MENU (Options Menu) and 2 or press and HOLD (Asterisk Symbol) key to
un-mute a muted call.
O If you answer the new
incoming call, both calls
display on the screen.
Depending upon which
call is on hold, Softkey 2
allows you to either hold
or continue the call.
O When a call is muted and
you accept a received
call, mute is automatically
turned Off.
O The mute function is
automatically released
when a call is ended.
38
To Next Page
Loading...
