Additional features
127
Using the Stopwatch
Use the stopwatch to measure elapsed time.
To start the stopwatch, perform the following steps:
1. Press the Menu soft key to access the Main
menu.
2. Highlight the Accessories icon.
3. Press the Select soft key.
4. Highlight the Stopwatch option.
5. Press the Select soft key.
6. Press the Start soft key.
7. Press the Lap soft key to save the
intermediate result (only the last two
intermediate resuls will be shown on the
display) and continue the measurement.
8. Press the Stop soft key to halt the
measurement.
9. Press the Continue soft key to resume the
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
