2. Highlight the Increase alert option.
3. Press the Select soft key.
4. Highlight the required value for the option.
5. Press the Select soft key.
6. Press the Clr key one or more times to return
to the idle display.
Enabling the vibrator feature
The vibrator feature is available only on the G955 and I755
DECT Handset.
If you enable the vibrator feature, the handset vibrates before ringing
(Vibrate then ring), intermittently with the ringing (Vibrate and ring) or
vibrates instead of ringing (Vibrate only).
To enable the vibrator feature, perform the following steps:
1. Open the Sounds and alerts menu as shown
in Accessing the Sounds and alerts menu
(page 155).
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
