3. Press the Select soft key.
5. Press the More soft key.
6. Highlight the Delete all option.
7. Press the Select soft key.
8. Press the Yes soft key.
9. Use the Keypad: Enter the PIN (authorisation
code) at the PIN prompt.
10. Press the Ok soft key.
11. Press the Clr key one or more times to return
to the idle display.
If you activate the Caller filter and configure the accept list,
the handset accepts calls only from the numbers in the
caller filter list. If you configure the block list, the handset
blocks all calls from the numbers in the caller filter list.
To activate an Accept list, a Block list or to deactivate the caller filter
(Filter off), perform the following steps:
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
Need help?
General
