10. Press the Clr key one or more times to return
to the idle display.
Resetting profiles
To set all profiles to the deafult factory settings, perform the following
steps:
1. Open the General settings menu as shown in
Accessing the General settings menu (page
134).
2. Highlight the Profiles option.
3. Press the Select soft key.
4. Highlight the Reset profiles option.
5. Press the Select soft key.
6. Press the Clr key one or more times to return
to the idle display.
Assigning the time and date
Use the time and date option to assign the current time and date. Only
use this opton when your communication system doesn‟t provide the
date and time information. If it does then setting the date and time has
only a temporary effedt and will, in due time, revert to the by the system
provided time and date.
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
