DECT system configuration
51
4. Choose either Empty (if there are less than
eight subscriptions to the system on the
handset) or the Name of the system you
would like to overwrite (here: DECT01).
5. Press the Select soft key.
6. Press the Yes soft key.
7. Use the Keypad: Enter the PARK code at the
PARK prompt.
Use a PARK code system ID if more than one
DECT system overlaps in your location. If only
one DECT system is available, make no entry,
and press the Skip soft key.
8. Press the Save soft key.
9. Use the Keypad: Enter the PIN (authorisation
code) at the PIN prompt.
10. Press the Ok soft key.
11. Use the Keypad: Enter the system name at the
Network name prompt.
12. Press the Save soft key.
13. Use the Keypad: Enter the phone number
assigned to your handset at the Number
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
Need help?
General
