NEC DT900 Series - Color Microbrowser and Enhanced Programmable Keys

DT900/DT900S Series Phone User Guide 8 -95
Ch 8 - Color Microbrowser and Enhanced Programmable Keys
C OLOR M ICROBROWSER AND E NHANCED
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P ROGRAMMABLE K EYS 8
The DT920/DT920S and DT930/DT930S phones support microbrowser functionality.
Specific phones support a color Microbrowser on the LCD screen that uses icons.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING THE MICROBROWSER
Note: For more information on using the Barge-Monitor or Hot Desking, see the
Supplemental Features Guide.
FEATURE KEY WITH THE MICROBROWSER
The Feature key on the telephone is used to program Speed Dial Keys and access
the Microbrowser on your phone.
Figure 8.1 Feature Key
Pressing the Feature key opens a screen that lets you enter the programmable mode
on your phone, or go to the Microbrowser on your phone.
Note: For the DT930 (ITK-8TCGX) and The DT930S (ITK-32TCGS): Press and hold
the Home key to enter the programmable mode on the phone.
After you press the Feature key, press the Program soft key to enter your phone’s
programmable mode, or press the Home soft key to go to the Microbrowser home
page.
Press the Home softkey to open the Microbrowser’s home page.
If you don’t press a softkey within 2 seconds, the Microbrowser will automatically
open.
You can still answer incoming calls while you are using the Microbrowser using the
telephone handset or by pressing the Speaker or Answer key on your telephone. Your
phone will exit the Microbrowser when you answer the call or press the Line Key to
view the caller information.
To exit the Microbrowser, press the Exit key on your phoneset. To return to the
Microbrowser’s home page, press the Home softkey.