NEC DT900 Series - To Set Forwarding for Your Phone; To Disable Forwarding for Your Phone

. . . . .
ENHANCED PROGRAMMABLE KEYS
DT900/DT900S Series Phone User Guide 8 -127
To set Forwarding for your phone
1 While the LED for the Forwarding key is not lit , press the Forwarding key.
The Handset Forwarding page from the phone microbrowser is opened.
2 Use the phone keypad and the microbrowser soft keys to configure the handset
forwarding conditions for your phone.
To disable Forwarding for your phone
1 While the LED for the Forwarding key is red , press the Forwarding key.
The Handset Call Forwarding page from the phone microbrowser is opened.
2 Select Clear forwarding.
The phone clears your handset forwarding settings.
Note: When Forwarding is disabled, the phone may continue to play the stutter dial
tone (if configured on your system) depending on the state of Message
Waiting Indicator (MWI) and Call Forwarding features.
Red No Answer Handset Forwarding is enabled.
Note: Handset Forwarding may have been enabled through the
Forwarding key, through the star codes, or using a supported
client application.
LED
Call Control
Home Screen
Comments