BLUETOOTH SUPPORT
10 -154 DT900/DT900S Series Phone User Guide
3 Select 1 User Settings.
4 Select 9 Bluetooth.
5 1 Enable/Disable and select 2 Enable.
6 Go to 1 User Settings\9 Bluetooth\2 Pairing\1 Inquiry.
7 On your headset, start pairing.
Note: The default time for pairing is 30 seconds. To set a longer time to allow for
pairing, go to
1 User Settings\9 Bluetooth \3 Additional Setting \1 Inquiry
time and select a longer length of time to allow for pairing. Repeat the steps
above to re-attempt pairing the headset to the phone.
BLUETOOTH SETTINGS
Use the Status menu on the phone to view the Bluetooth settings when a Bluetooth
headset is paired to the phone.
To access Bluetooth settings on the DT930 (ITK-8TCGX) and
the DT930S (ITK-32TCGS)
1 Select the Multi settings icon.
Figure 10.5 Multi settings icon
2 Select the Settings icon.
Figure 10.6 Settings icon
3 Select 1 User Settings.
4 Select 9 Bluetooth.
The menu manages the following events:
Table 10.1 Bluetooth Settings Softkeys
Softkey Feature Description
d Move to previous menu item (does not show if the first
menu item is selected)
b Move to next menu item (does not show if the last menu
item is selected)
Exit Return to User Settings menu
Select Move to highlighted menu item
To Next Page
Loading...
