NEC DT900 Series - To Delete a Specific Entry from the Call History; Monitor Presence LED Colors for Speed Dial Keys

CALL HISTORY AND DIRECTORIES
Call History
9 -136 DT900/DT900S Series Phone User Guide
Table 9.2 Monitor Presence LED Colors for Speed Dial Keys
Note: Phones do not publish presence information. Depending on other phones on
your system and any phone application software that you use, you may see
different LED behavior for different presence states.
8 Press the Save softkey to save the entry.
The phone will confirm that the entry was added to the Personal Directory.
Note: If the Call History entry is already in your Personal Directory, you can edit the
entry information.
9 Press Enter b on the cursor pad or the OK softkey to return to the Personal Directory,
or press the Exit key to return to the main phone screen.
DELETE CALL HISTORY INFORMATION
Note: Call History information is not saved permanently on the phone, it is only
stored on your phone until the phone restarts. All previous Call History
information is deleted when you restart your phone.
If your system is configured for User Portability, Call History information is not
stored on the phone, it is downloaded from and saved to the network. You can
still use the phone to delete specific Call History entries or all Call History
information.
To delete a specific entry from the Call History
1 Press the Menu key.
Type Status
Programmable
Key LED
Line Key Registered LED is not lit
Unregistered LED is not lit
Speed Dial Key
(No Monitoring)
Not Available LED is not lit
BLF Idle LED is not lit
Ringing (SIP@Net) Blinking Red
Ringing (3C system) Blinking Green
Subscription Failed LED is not lit
Online (3C system)
(Phone is Online)
Green
On the Phone
(Phone is in use)
Red
Held (3C system) Blinking Red
Busy Red