NEC DT900 Series - To View the Phone Settings; To View the Phone Settings on the ITK-32 LCGS and ITK-32 TCGS; To View the Firmware Information for Your Phone; To View Firmware Information on the ITK-32 LCGS and ITK-32 TCGS

BASIC SETUP WITH THE MENUS AND CURSOR PAD
4-48 DT900/DT900S Series Phone User Guide
Note: You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
To view the phone settings
1 Press the Menu key.
2 Select 6 Status.
3 Select 1 Terminal Information to view the hardware and firmware information for your
phone, or select 2 Network Information to view the network information for your
phone, or select
3 SIP Information to view the settings for your phone and SIP account
on the network.
4 Use the cursor pad or the  Up and  Down softkeys to scroll through the phone
settings.
To view the phone settings on the ITK-32LCGS and ITK-32TCGS
1 Select the Multi settings icon.
Figure 4.6 Multi settings icon
2 Press the Settings icon.
Figure 4.7 Settings icon
3 Select 4 Status.
4 Select 1 Terminal Information to view the hardware and firmware information for your
phone, or select
2 Network Information to view the network information for your
phone, or select 3 SIP Information to view the settings for your phone and SIP account
on the network.
5 Use the cursor pad or the  Up and  Down softkeys to scroll through the phone
settings.
To view the firmware information for your phone
1 Press the Menu key.
2 Select 6 Status.
3 Select 1 Terminal Information.
4 Use the cursor pad or Up/Down softkeys to scroll to the Firmware Version screen.
5 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
If you need to upgrade to the latest firmware version available for your phone on your
network, restart your phone.
To view firmware information on the ITK-32LCGS and ITK-32TCGS
1 Select the Multi settings icon.