. . . . .
USE OF AN EXTERNAL AC ADAPTER
DT900/DT900S Series Phone User Guide C-183
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USE OF AN EXTERNAL AC ADAPTER
Only use the AC adapter that comes with this terminal.
Plug the AC/DC adapter in a wall outlet socket. It is recommended that the AC/DC
adapter is located near the equipment for easy access/removal of the adapter.
After power has been applied, the terminal will start operating.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USE OF AN IEEE802.3AF POWER SUPPLY
This terminal is compliant with IEEE 802.3af Class 1. If the Local Area Network
supports powering of the terminal by means of the IEEE802.3af standard, an external
AC/DC adapter is not needed. In this case it is sufficient to connect the terminal to the
10/100 Base-T wall socket by means of the cable that comes with the product.
After network power has been applied, the terminal will start operating.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DECLARATION OF CONFORMITY
Č ESKY
“NEC Enterprise Solutions” tímto prohlašuje, že tento “DT700”/"DT800" je ve shodě
se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
http://www.nec-enterprise.com/Support/Declaration-of-Conformity
DANSK
Undertegnede “NEC Enterprise Solutions” erklærer herved, at følgende udstyr
“DT700”/"DT800" overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
http://www.nec-enterprise.com/Support/Declaration-of-Conformity
DEUTSCH
Hiermit erklärt “NEC Enterprise Solutions”, dass sich das Gerät “DT700”/"DT800" in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
http://www.nec-enterprise.com/Support/Declaration-of-Conformity
To Next Page
Loading...
