NEC DT900 Series - Search Directory;Corporate Directory; To Search the 3 C System Directory

. . . . .
USING THE MICROBROWSER
DT900/DT900S Series Phone User Guide 8 -113
Each conference entry shows the time the conference participant has been
connected (e.g. [00:04]), the participant’s address (e.g. 1006, DT730DG_2) and the
participant’s name (Last, First).
This page automatically updates every 30 seconds. The time each conference
participant has been connected only updates when the page is refreshed, that is, the
time does NOT update every second.
If you select a conference address with no calls in progress, the participant details are
replaced by the string “No conference in progress.” All other functionality of the
conference detail page is the same (the page updates every 30 seconds and the user
may join the conference).
SEARCH DIRECTORY/CORPORATE DIRECTORY
Note: For the DT930 (ITK-8TCGX) and The DT930S (ITK-32TCGS): Press the
Home key to access the Search Directory.
SEARCH DIRECTORY
Selecting the Search Directory item invokes the following XML page, allowing the
user to enter a string to search the
3C System Directory. Note that the 3C System
Directory
is different than the Personal Directory maintained by the phone.
To Search the 3C System Directory
1 Press the Feature key (some models may have a soft key).
2 Press the Home softkey or wait 2 seconds to connect to the microbrowser home page.
3 Select Search.
4 Enter your search string and press the OK soft key.
The Search Directory search string can be a name or a number. The search string
field has focus upon entering this page.
The keypad is in lower case character entry mode by default when entering the
Search Directory page. To toggle to numeric entry mode, press the “*” key.
Uppercase character mode is not supported. Searches are not case-sensitive.
Off-Hook (handset) If speaker is ON, turn speaker OFF, move audio to
handset and keep focus on current screen. If headset is
active, move audio to handset and keep focus on current
screen.
Speaker key On-Hook
(handset)
behavior:
If speaker is ON, turn speaker OFF and keep focus on
current screen.
Off-Hook
(handset)
behavior:
If speaker is OFF, turn Speaker ON and keep focus on
current screen. If speaker is ON, activate handset and
keep focus on current screen.
Headset active
behavior:
Turn Speaker ON and keep focus on current screen.
Hard Key Features: Explanation