NEC DT900 Series - To View the Maximum Numbers of Calls You Can Handle; On Your Phone; To View the Maximum Numbers of Calls You Can Handle on the ITK-32 LCGS and ITK-32 TCGS; Multi Settings Icon

BASIC SETUP WITH THE MENUS AND CURSOR PAD
4-50 DT900/DT900S Series Phone User Guide
5 Use the cursor pad or the  Up and  Down softkeys to scroll to the IP Address screen.
6 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
To view the maximum numbers of calls you can handle
on your phone
The maximum number of calls you can handle concurrently is determined by your
system administrator, but you can view the maximum number of calls that are allowed
concurrent on your phone from the Status menu.
1 Press the Menu key.
2 Select 6 Status.
3 Select 3 SIP Information.
4 Use the cursor pad or the  Up and  Down softkeys to scroll to the Max Calls screen.
5 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
To view the maximum numbers of calls you can handle
on the ITK-32LCGS and ITK-32TCGS
1 Select the Multi settings icon.
Figure 4.12 Multi settings icon
2 Press the Settings icon.
Figure 4.13 Settings icon
3 Select 4 Status.
4 Select 3 SIP Information.
5 Use the cursor pad or the  Up and  Down softkeys to scroll to the Max Calls screen.
6 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.