. . . . .
CALL HISTORY AND DIRECTORIES
The Personal Directory
DT900/DT900S Series Phone User Guide 9 -147
4 Monitor
Note: Monitoring can only be done on other lines that are internal to your system.
You cannot monitor external or outside lines.
a. If you have a Speed Dial number assigned for this entry or are adding a Speed Dial
number for the entry, you can select the monitor status you want for the entry.
Valid options for monitoring are:
• 1 None - Do not monitor presence state changes for this Speed Dial Key
• 2 Visual - Presence state is shown visually using the LED on the Speed Dial Key
when a Speed Dial is assigned to the entry, and a Presence icon is shown in the
Personal Directory and on the DESI-Less display of the phone.
• 3 Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key when a Speed Dial is assigned to the entry, and a Presence icon is
shown in the Personal Directory and on the DESI-Less display of the phone. When
a call is ringing on the monitored terminal, play a soft ring tone.
Note: Option 3 Visual and Soft Ring is only valid for SIP@Net platforms. Contact
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.
Table 9.6 Monitor Presence Icons
Type Status Icon
Line Key Registered
Unregistered
Speed Dial Key
(No Monitoring)
Not Available
BLF Idle
Ringing (SIP@Net)
Ringing (3C system)
Subscription Failed
Online (3C system)
(Phone is Online)
On the Phone
(Phone is in use)
Held (3C system)
Busy
To Next Page
Loading...
