NEC DT900 Series - Basic Settings;Configuration

DT900/DT900S Series Phone User Guide 4-37
Ch 4 - Basic Settings/Configuration
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B ASIC S ETTINGS /C ONFIGURATION 4
This chapter describes how to configure basic settings on your DT920/DT920S and
DT930/DT930S phones.
Depending on the model of your phone and the configuration of your system, not all
features may be available on your phone.
Note: The DT920 phones have a smaller screen display than is shown in the
examples in this section. You may have to scroll using the cursor pad and
softkeys to see all available options.
The following symbols represent the phone’s directional cursor pad and key pad:
DT PHONE DISPLAY
The  Up and  Down softkeys on the phone indicate to the user when there are
more options than displayed on the LCD screen.
User actions/Keys
Digit key Select corresponding menu Item
4-way scroll BACK key
c
(Redial key)
Return to User Settings menu
4-way scroll FORWARD key
a
(Directory key)
Select highlighted menu item
4-way scroll UP key
d
(Volume UP key)
Move to previous menu item
4-way scroll DOWN key
b
(Volume DOWN key)
Move to next menu item
ENTER key
b
(center button on cursor pad)
Select highlighted menu item