DT SERIES PHONE SPECIFICS
2-10 DT900/DT900S Series Phone User Guide
Table 2.6 DT920S(ITK-32LCGS) Keys and Parts
1. Call Indicator Lamp • If missed call notification for the call indicator lamp is dis-
abled (default), the lamp flashes for incoming and missed
calls, and displays steady red for message waiting.
• If missed call notification for the call indicator lamp is
enabled, the lamp flashes for incoming calls and missed
calls, including missed calls where someone has left a voice
mail. The lamp only display steady red if you still have mes-
sages waiting after you have cleared your missed calls.
•
2. LCD The LCD (Liquid Crystal Display) provides call status activity
information plus date, time and softkey operation.
3. Softkeys The softkeys show the available features for your current
activity. Any feature shown at the bottom of the LCD is
available. The appropriate key is displayed on the screen
according to the call handling process.
4. Programmable Keys The first programmable key is reserved as the Line Key. Line
Keys allow the user to select which line to operate on.
Any programmable keys not used as Line Keys can be
programmed as Speed Dial Keys by the user or system
administrator. Numbers up to 24 digits can be assigned to
Speed Dial Keys. The numbers may be a telephone number or
star/hash codes.
5. Exit key This key allows you to exit from the Menu or Help mode and
go back to the telephone main screen.
6. Mic key Press key to mute the microphone. The LED on this key
flashes when the microphone is muted. Press the key again to
un-mute the microphone.
This button displays a red light when the phone is idle. The
light does not display when the microphone is in use during a
call.
7. Headset key Press the Headset key to enable the use of a supported
headset.
8. Speaker key Controls the built-in speaker which can be used for Hands
Free dialing and conversations.
The LED on this key lights when the speaker is active.
9. Hold key Press this key to place a call on hold.
10. Cursor pad Use this key to navigate to various features.
The up and down keys on the cursor pad can be used to adjust
the volume of the phone.
11. Multi (Scroll) key Press this key to scroll to the next page of Programmable
Keys.
12. Help key Press the Help key and then press a softkey to display
information about that softkey.
To Next Page
Loading...
