NEC DT900 Series - Sip@Net System Features; Programmable Keys; Speed Dial Keys; Example

DT900/DT900S Series Phone User Guide B-175
App B - SIP@Net System Features
. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SIP@N ET S YSTEM F EATURES B
PROGRAMMABLE KEYS / SPEED DIAL KEYS
The Programmable Keys / Speed Dial keys can be pre-programmed with an internal
telephone number (for example, a colleague’s number) of which the status can be
monitored by means of the LEDs. This Status Monitoring can only be done for internal
numbers.
When the LED is:
• OFF: The telephone is idle.
• FLASHING: The telephone is ringing.
• ON: The telephone is busy.
It is also possible to program a dedicated function/feature under the Programmable
Keys / Speed Dial keys.
Function Activation / De-Activation and Status Monitoring can be done for the
following functions:
• Follow me
• Automatic Ring Back
• Call Forwarding on Busy Extension
• Night Extension absence/presence
• Executive/Secretary absence/presence
• Group absence/presence
• Don't disturb
• Call Pickup
Pressing the key activates the function: The corresponding LED is switched ON.
Pressing the key once more de-activates the function: The LED is switched OFF.
Example
One of the Programmable Keys / Speed Dial keys can be programmed with the Do
Not Disturb (DND) function. When activated, indialling parties will fall back to an
operator.
Press the speed dial key, programmed with the DND function (LED is ON), or dial the
“activate prefix”.
Press the speed dial key once more (LED is OFF), or dial the “cancel prefix”, to
cancel DND.
Ask your system administrator for more details.