NEC DT900 Series - To Access the Coroprate Directory on the DT930 (ITK-8 TCGX) and the DT930 S (ITK-32 TCGS); To Access the Corporate Directory; To Dial a Number from the Corporate Directory; Directory Key

CALL HISTORY AND DIRECTORIES
The Corporate Directory
9 -150 DT900/DT900S Series Phone User Guide
VIEWING THE CORPORATE DIRECTORY AND
ENTRY DETAILS
To access the Coroprate Directory on the DT930 (ITK-8TCGX) and
the DT930S (ITK-32TCGS)
1 Press the Directory key.
Figure 9.5 Directory key
2 Select 2 Corporate Directory.
Note: To access the Personal Directory, Select 1 Personal Directory.
To access the Corporate Directory
1 Do one of the following:
Using the Menu Key:
a. Press the Menu key.
b. Select 1 Directory.
c. Select 2 Corporate Directory.
Using the cursor pad:
a. Press the Directory key (right cursor pad key).
b. Select 1 Directory.
c. Select 2 Corporate Directory.
2 Enter your search criteria and press the OK softkey.
To edit your search criteria, use the c Left/a Right keys on the cursor pad and the
Delete softkey.
To cancel the search, press the Back softkey to return to the Directory menu, or the
Exit softkey to exit to the main call screen.
3 Use the  Up and  Down softkeys or the d Up/b Down keys on the cursor pad to
scroll through the Corporate Directory search entries.
4 Press the Exit softkey, or press the Exit key to return to the main phone screen.
To dial a number from the Corporate Directory
• Pres the Dial softkey.
If you are dialing an external number and the outside access code is not programmed
into the Corporate Directory entry, you may need to add the outside access code to
the number before it is dialed, depending on the configuration of your system.
The phone dials the telephone number.