NEC DT900 Series - To View the IP Address of Your Phone; To View the IP Address on the ITK-32 LCGS and ITK-32 TCGS; Multi Settings Icon; Settings Icon

. . . . .
BASIC SETUP WITH THE MENUS AND CURSOR PAD
DT900/DT900S Series Phone User Guide 4-49
Figure 4.8 Multi settings icon
2 Press the Settings icon.
Figure 4.9 Settings icon
3 Select 4 Status.
4 Select 1 Terminal Information.
5 Use the cursor pad or Up/Down softkeys to scroll to the Firmware Version screen.
6 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
If you need to upgrade to the latest firmware version available for your phone on your
network, restart your phone.
To view the IP address of your phone
If you are troubleshooting problems with your phone, you may need to know the IP
Address of your phone.
1 Press the Menu key.
2 Select 6 Status.
3 Select 2 Network Information.
4 Use the cursor pad or the  Up and  Down softkeys to scroll to the IP Address screen.
5 Press the Exit softkey to return to the Status menu.
Note:
You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.
To view the IP address on the ITK-32LCGS and ITK-32TCGS
1 Select the Multi settings icon.
Figure 4.10 Multi settings icon
2 Press the Settings icon.
Figure 4.11 Settings icon
3 Select 4 Status.
4 Select 2 Network Information.