NEC DT900 Series - Page 154

CALL HISTORY AND DIRECTORIES
Call History
9 -134 DT900/DT900S Series Phone User Guide
4 Use the cursor pad or the  Up and  Down softkeys to scroll to the number you want
to delete.
5 Press the Options softkey.
6 Select 2 Directory Add.
7 Review the information. To change any of the fields in the entry, use the cursor pad or
the
 Up and  Down softkeys to scroll to the field, then press the More softkey and
then the Edit softkey to edit that field.
1 Name
Up to 24 characters may be entered for the name.
• Press the Delete softkey to delete the last character entered, or press the
Cancel softkey to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
* key on the keypad.
• To add a space to an entry, press #.
• To enter special characters, press the 1 key.
For a list of special characters, see “Speed Dial and Personal Directory
Character Sets” in your phone’s User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Note: Fewer than 24 characters may be displayed depending upon the contents of
the this field since a proportional font is used to display the field.
2 Number
Up to 24 characters may be entered for the number. Only digits, “*” and “#” may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Note: Fewer than 24 characters may be displayed depending upon the contents of
the this field since a proportional font is used to display the field.
3 Speed Dial
Speed Dial entries can be internal or external numbers.
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
4 Monitor
If you have set a Speed Dial for the entry, you can set Monitor settings for the entry.
Note: Monitoring can only be done on other lines that are internal to your system.
You cannot monitor external or outside lines.
Valid options for monitoring are: