DT SERIES PHONE SPECIFICS
2-6 DT900/DT900S Series Phone User Guide
Note: Phones do not publish presence information. Depending on other phones on
your system and any phone application software that you use, you may see
different LED behavior for different presence states.
Table 2.4 Page Numbers
Speed Dial Key
(No Monitoring)
Not Available LED is not lit
BLF Idle LED is not lit
Ringing (SIP@Net) Blinking Red
Ringing (3C system) Blinking Green
Subscription Failed LED is not lit
Online (3C system)
(Phone is Online)
Green
On the Phone
(Phone is in use)
Red
Held (3C system) Blinking Red
Busy Red
Page Number Programmable Keys Behavior
1 Programmable Keys 2 - 9
(Key 1 is the Line Key)
A black background on a
page number indicates
the currently displayed
page.
A white background on a
page number indicates
the page is inactive.
3C system:
A flashing (alternating white and
black background) on a page
number indicates an event
happening on that page, such as
a presence change on a
monitored line. Flashing will stop
when that line is connected to
the call or when the line returns
to an idle state.
2 Programmable Keys 9 - 16
3 Programmable Keys 17 - 24
4 Programmable Keys 25 - 32
Type Status
Programmable
Key LED
To Next Page
Loading...
