3. Setting Up Windows Server 2008 R2
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
4. Enter the team name and click Next.
Note
Specify the team name with 3 or more characters.
If the team name is specified with 3 or less characters, creating the secondary team will fail
with the following pop-up message displayed:
"Failed to create a team."
5. Select the adapters to include in the team and click Next.
Note
Check "PCI bus" and "Function (*)" of adapters to be included in the team.
Use adapters of the same functionality. Create a team with an adapter having smaller PCI
bus number and an adapter having larger PCI bus number.
(*) "Function" can be verified in General tab of Properties window.
PCI bus: Smaller value (PCI module #0 side)
Larger value (PCI module #1 side)
Function: 0 (Port #0 side)
1 (Port #1 side)
Example:
Team 0
PCI bus (smaller value), Function 0 (Port #0 side)
PCI bus (larger value), Function 0 (Port #0 side)
Team 1
PCI bus (smaller value), Function 1 (Port #1 side)
PCI bus (larger value), Function 1 (Port #1 side)
To Next Page
Loading...
