SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120h-2M
NEC Corporation Revision 5.0 – January 2018 39
Slide Rail Kit
Product Name / Description
Tool-free Slide Rail Kit for 2U-2.5inch Server
Tool-free Slide Rail Kit for 2U-3.5inch Server
Slide Rail Kit for 2U-2.5inch Server
NOTE:
Inner rails are not necessary.
Slide Rail Kit for 2U-3.5inch Server
NOTE:
Inner rails are not necessary.
NOTE:
The slide rail kit must be ordered with a base model.
Cable Management Arm
Product Name / Description
Cable Management Arm for 2U Server
Cable Arm for Tool-free Slide Rail Kit
Cable Management Arm for 2U Server
Cable Arm for Slide Rail Kit
NOTE:
The cable management arm install in the rear of system to manage cables.
The cable management arm must be ordered with a base model.
The cable management arm is required if you want to replace a fan unit while the system is running.
Starter Pack DVD
The starter pack DVD includes the software and driver qualified by NEC. In order to obtain technical support from NEC, please be
sure to install the software and drivers provided with the starter pack. The latest DVD image can be downloaded for free from NEC
website during the warranty or maintenance contract period.
Product Name / Description
Express5800/R120h-1M, R120h-2M Starter Pack
NOTE:
By applying Starter Pack, Driver software qualified by NEC can be installed. To use servers, UL9020-B108 Starter Pack or Starter
Pack downloaded from Web site must be installed.
Starter Pack may be updated without notice. The latest version of Start Pack is available in Web site. Starter Pack can be
downloaded within Warranty term.
User Guide of this product is supplied as PDF file in NEC Web site.
To Next Page
Loading...
Need help?
General
