Figure 9-4 Example Configuration 2 - Dynamic IP Addressing, One LAN
Programming - CPU:
10-12-01 : CPU Network Setup - IP Address 0.0.0.0
10-12-10 : CPU Network Setup - Subnet Mask 255.255.255.0
10-12-03 : CPU Network Setup - Default Gateway 192.168.1.254
10-12-09 : CPU Network Setup - VoIPDB Address
(This assignment is for CPU-C1 when the VoIP daughter board is installed.)
192.168.1.20
10-13-01 : In-DHCP Server Setup - DHCP Server Mode Enable
10-14-01 : Managed Network Setup (Min) 192.168.1.200 Min
10-14-02 : Managed Network Setup (Max) 192.168.1.250 Max
10-16-16 : SIP Server Address 192.168.1.20
10-16-27 : SIP Server Port 5080
Programming - VoIP DSP:
84-26-01 : VoIP Basic Setup - IP Address 192.168.1.21
Programming - IP Phones:
DHCP Mode (Ext. 200): Enabled
6.3 Example Configuration 3 - Static IP Addressing, Routed WAN
This example shows IP Phones connected to an NEC SL2100 system over a Wide Area Network
(WAN), with static IP addressing. This is a typical scenario - a small branch office connecting to the
main office.
SL2100
ISSUE 1.0
9-6
IP Multiline Station (SIP)
To Next Page
Loading...
