Program 10 : System Configuration Setup
10-19 : VoIP DSP Resource Selection
Level:
IN
Description
Use Program 10-19 : VoIP DSP Resource Selection to define the criteria for each DSP resource on
the VoIPDB.
Input Data
Slot Number 0
DSP Resource Number 1 ~ 128
Item
No.
Item Input Data Description Default
01 VoIP DSP Resource
Selection
0 = Common use for
both IP extensions and
trunks
1 = Use for IP exten-
sions
2 = Use for SIP trunks
3 = Use for Networking
5 = Blocked
6 = Common without
unicast paging
7 = Multicast paging
8 = Unicast paging
This program is used to assign the 128 re-
sources of the VoIPDB.
NEC recommends leaving the default set-
tings as system default.
Resource 1 ~
128 = 0
Conditions
None
Feature Cross Reference
None
SL2100
ISSUE 1.0
5-16 Program 10 : System Configuration Setup
Program
10
To Next Page
Loading...
