2.1.3 IP Address of Other Systems Within the Network
• 10-27 : IP System ID - IP Address
The IP Addresses of all other systems within the network must be defined in this program. Each
system is identified by a 'System Number' (1 to 50), this is used within the numbering plan to route
calls to another system.
Input Data
System ID 01 ~ 50
Item
No.
Item Input Data Default Related Program
01 IP Address
System ID is related with the
System ID in the Numbering
Plan (Program 11-01-03). When
the digits are analyzed and the
system ID is determined from the
system data set in the Number-
ing Plan, the Networking call will
be sent to the IP Address set in
this program.
The IP Address should be the IP
Address of the peer CPU (Pro-
gram 10-12-01).
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
0.0.0.0 11-01-03
10-12-01
02 Call Procedure Port
The Port Number should be set
with the same value as the H.
225 setup port in Program
84-02- 33.
1 ~ 65535 1730 84-02-33
Table 13-3 Networking TCP Port Example
System – A System – B
System ID: 1 System ID: 1
IP Address: 172.16.5.10 IP Address: 172.16.0.10
Port: 1730 Port: 1730
2.1.4 Networking TCP Port
• 10-20-01 : LAN Setup for External Equipment - TCP Port
Define the TCP port number for communicating to external equipment. The port number defined
should be the same in each networked system.
Input Data
SL2100
ISSUE 1.0
13-6
AspireNet
To Next Page
Loading...
