NEC SL2100 - Figure 8-4 DHCP - Data Entry for 1 St DHCP Server

default value 00 and add the IP address of the SL2100 system as a Hex value preceded by a 01,
for the first SIP server. Listed is an example of what data is to be entered:
• 01 = 1st SIP Server
• AC = Hex for 172
• 10 = Hex for 16
• 00 = Hex for 0
• 0A = Hex for 10
This tells the system that the first SIP server’s IP address is: 172.16.0.10. Once assigned, click on
Apply to update the DHCP server.
Figure 8-4 DHCP - Data Entry for 1st DHCP Server
SL2100
ISSUE 1.0
8-6
DHCP Client