NEC SL2100 - Figure 9-20 Type of Service Window

DSCP 26 68
DSCP 28 70
DSCP 30 78
DSCP 32 80
DSCP 34 88
DSCP 36 90
DSCP 38 98
DSCP 46 B8
DSCP 48 C0
DSCP 56 E0
13.6.1 Enter Values on a Per Phone Basis
• By the web browser
• By configuration mode through the dial pad
To enter the values per phone, browse to the individual phone or enter the configuration mode through
dial pad.
The following example describes assigning these fields via the web browser.
1. Log in on PC. Refer to Section Logging In on the PC on page 9-15.
2. Go to Network Settings >Advanced Settings >Type Of Service.
Figure 9-20 Type of Service Window
ISSUE 1.0
SL2100
Networking Manual 9-25