SECTION 8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
(This Feature is available for IP Multiline Terminal Only.)
When using a display telephone in programming mode, various Softkey options are displayed. These
keys will allow you to easily select, scan, or move through the programs.
Table 5-4 Softkey Display Prompts
Softkey Display Prompts
If you press this Soft-
key ...
The system will ...
back Go back one step in the program display.
You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a
list of programs.
Scroll down through the available programs.
Scroll up through the available programs.
select Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
- 1 Move back through the available program options.
+ 1 Move forward through the available program options.
SECTION 9 PROGRAMMING YOUR SYSTEM
This sections describes the programs used to connect the NEC SL2100 to a data network and to
configure the VoIP functions.
SL2100
ISSUE 1.0
5-6
PROGRAMMING
To Next Page
Loading...
