NEC SL2100 - 4.3.5 Cancel Message Waiting; 4.4 Answering Calls; 4.4.1 Answering an Outside Call

Program 10 : System Configuration Setup
10-16 : Option Information Setup
Level:
SA
Description
Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to
each client.
The items highlighted in gray are read only and cannot be changed.
Input Data
Item
No.
Item Input Data Description Default
01 Router Code number 0 ~ 255 Set the Router IP ad-
dress.
3 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02 DNS Server Code number 0 ~ 255 Set IP address of DNS
Server.
6 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
05 MGC IP Address Code number 0 ~ 255 129 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
06 Client Host Name Code number 0 ~ 255 Set the Client Host
Name.
12 (Fixed)
Maximum 64 character strings No Setting
07 DNS Domain Name Code number 0 ~ 255 Set the DNS Domain
Name.
15 (Fixed)
Maximum 20 character strings No Setting
08 Download Protocol Code number 0 ~ 255 Set Download Protocol
used for AutoConfig (for
8IPLD-C1 Terminal).
43 (Fixed)
Sub code number 163 (Fixed)
1 = FTP
2 = HTTP
1
09 Encryption Information Code number 0 ~ 255 Set an Encryption Infor-
mation used for Auto-
Config (for 8IPLD-C1
Terminal).
43 (Fixed)
Sub code number 164 (Fixed)
Fixed 128 character strings No Setting
10 FTP Server Address Code number 0 ~ 255 Set a FTP Server Ad-
dress used for AutoCon-
fig.
43 (Fixed)
Sub code number 141
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
ISSUE 1.0 SL2100
Networking Manual 5-13
Program
10