NEC SL2100 - Table 7-1 Delete + from Incoming SIP INVITE

Program
Number
Program Name/Description Input Data Assigned Data Level
1 2 3
84-14-16 SIP Trunk Basic Information Setup
– SIP Trunk SIP-URI E.164 Incom-
ing Mode
When this data is set to 1, then for
any inbound SIP calls that include
a + and a country code not defined
in Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then de-
lete both the + and country code
but do not add the International
Access code.
When it is set to 2, then for any in-
bound SIP calls that include a +
and a country code not defined in
Program 10-02-01, delete the +
and add the International Access
Code in Program 10-02-02. If the
country code is a match then de-
lete both the + and country code
and add the Caller ID Edit Code
from Program 10-02-03.
0 = Disable
1 = Mode 1
2 = Mode 2
Profile (1 ~ 6)
0 ✓
8.4 Operation
8.4.1 Delete the + only from an incoming SIP INVITE using E.164 numbering scheme:
Table 7-1 Delete + from Incoming SIP INVITE
Program 84-14-16 Program 84-14-13 Description
0: Off 0: Off
Or
1: On
When a + is presented as the international access code in a SIP INVITE
for incoming calls then delete the + only.
<Example Output>
Incoming call from: +4902131795770
Displayed in terminal incoming caller history as:
ISSUE 1.0 SL2100
Networking Manual 7-21