NEC SL2100 - Program 15: Extension, Basic Setup; 15-05: IP Telephone Terminal Basic Data Setup

Program 15 : Extension, Basic Setup
15-05 : IP Telephone Terminal Basic Data Setup
Level:
IN
Description
Use Program 15-05 : IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP
telephone.
Input Data
Extension Number Maximum eight digits
Item
No.
Item Input Data Description Default Related
Program
01 Terminal Type 1 = H.323
2 = SIP
3 = None
4 = DT800/DT700
3
02 IP Phone Fixed
Port Assignment
MAC address
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
MAC Address of registered SIP MLT
phone is stored and/or can input the
MAC address of an SIP MLT phone
so when it comes online it is provi-
ded with the extension in which the
MAC address matches.
00-00-00-
00-00-00
15-05-01
04 Nickname Up to 48 characters Nickname section on Invite mes-
sage.
Example :
Extension 100 has a Nickname set
to PAUL.
Extension 101 has command
15-05-17 set to Nickname.
The inbound call to extension 101,
from 100, shows PAUL.
Nickname must be unique in the
system.
No Setting 15-05-17
07 Using IP Address 0.0.0.0 ~
255.255.255.255
- 15-05-01
09 Call procedure
port
0 ~ 65535 - 15-05-01
11 DT800/DT700
C/CTR Port
0 ~ 65535 -
15 CODEC Type 1 = Type 1
2 = Type 2
3 = Type 3
4 = Type 4
5 = Type 5
Assign the CODEC Type of the SIP
MLT.
1 84-24
84-11
15-05-01
16 Authentication
Password
Up to 24 characters Assign the authentication password
for SIP single line telephones.
Web pro indicates password as
*
mark.
No Setting 15-05-01
ISSUE 1.0 SL2100
Networking Manual 5-19
Program
15