Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level:
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the CPU.
Input Data
Item
No.
Item Input Data Description Default
01 DHCP Server Mode 0 = Disable
1 = Enable
Enable or disable the use of the built-in
DHCP Server. This program cannot be
enabled if PRG10-63-01 is enabled.
0
02 Lease Time Days 0 ~ 255 Lease Time of the IP address to a cli-
ent.
Pressing the Hold Key increments to
the next setting data.
0 day
Hour 0 ~ 23 0 hour
Minutes 0 ~ 59 30 minutes
05 Last DHCP Data 0 = Disable
1 = Enable
If 10–13–01 is enabled, this setting de-
termines if DHCP resource is enabled
or disabled.
1
Conditions
None
Feature Cross Reference
None
SL2100 ISSUE 1.0
5-10 Program 10 : System Configuration Setup
Program
10
To Next Page
Loading...
