EasyManua.ls Logo

NEC SL2100 - Figure 9-5 Example Configuration 3 Static IP Addressing, Routed WAN

NEC SL2100
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis
CPU-C1
VoIP
VoIPDB IP Addres: 192.168.1.20
VoIP DSP: 192.168.1.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
IP Phone 1
192.168.2.200
IP Phone 2
192.168.2.201
PoE Switch/Hub
Router VPN
192.168.2.254
Router VPN
192.168.1.254
Switch
WAN
(Leased Line, Frame
Relay, etc.)
Figure 9-5 Example Configuration 3Static IP Addressing, Routed WAN
Programming - CPU:
10-12-01 : CPU Network Setup - IP Address 0.0.0.0
10-12-10 : CPU Network Setup - Subnet Mask 255.255.255.0
10-12-03 : CPU Network Setup - Default Gateway 198.168.1.254
10-12-09 : CPU Network Setup - VoIPDB IP Address
(This assignment is for CPU-C1 when the VoIP daughter board is installed.)
192.168.1.20
Programming - VoIPDB DSP:
84-26-01 : VoIPDB Basic Setup - IP Address (Slot # - DSP) 192.168.1.21
Programming - IP Phones:
DHCP Mode: Disabled
IP Address: 192.168.2.200
Subnet Mask: 255.255.255.0
1st Server Address: 198.168.1.20
1st Server Port: 5080
ISSUE 1.0 SL2100
Networking Manual 9-7

Table of Contents

Other manuals for NEC SL2100

Related product manuals