NEC SL2100 - Figure 9-11 VLAN Priority; Figure 9-12 PC Port Settings Window

6. VLAN Priority allows an entry of 0~7 for the VLAN Priority. VLAN mode must be enabled for this
entry to be valid.
Enter the required priority, and click OK.
Figure 9-11 VLAN Priority
13.5.3 Tagging Data Packets Using IP Phone
1. While logged in to the IP address of the phone on the PC, go to Network Settings>Advanced
Settings>PC Port Settings. Refer to Section Logging In on the PC on page 9-15.
2. Access the following three menus to select options for PC Port Settings:
• Port VLAN Mode
• Port VLAN ID
• Port VLAN Priority.
Figure 9-12 PC Port Settings Window
3. Select the VLAN Mode to enable or disable this feature.
SL2100
ISSUE 1.0
9-18
IP Multiline Station (SIP)