NEC Terrain User Manual

30
DRAFT
Switch Between Calls (Swap)
When you have an active call and a call on hold, you may switch between the two calls,
changing the one on hold to active and placing the other on hold.
1. Tap Swap.
The current call, in green, is placed on hold and the previous call on hold, in black, is
then reactivated so that you can continue conversing with that person. The active call will
appear in a green box.
2. Tap
to end the currently active call.
To end a specic call
1. Tap
until the call you want to end appears in a green box.
2. Tap
to end the specic call.
To answer a call while you have a call in progress
1. Tap
and slide to the right to answer another call.
2. To switch between the two calls, tap
.
To end a call on hold
1. Tap
to disconnect the active call.
2. The call on hold will now become the active call. Tap to end the call.
Multi-Party Calls (Merge Calls)
The Multi-Party or Merge feature allows you to make or answer a series of calls and place them on hold and then
join or Merge the calls into one multi-party call. This feature joins all of the calls you have established with your
phone (both active and on hold) into one multi-party call.
1. Make or receive a call.
2. Tap the Hold and then press Add call and dial another person. Or you can answer an incoming
call (this will automatically place your current call on hold).
3. To merge the two calls, tap
Merge.
4. Tap to end the call.
Note: The Merge option combines all of the calls you have established with your phone (both active and on hold). The Swap option places
the current call on hold and then activates the previous call.
Search for Contact
1. During an active call, tap .
2. Tap Contacts
, to open your contacts.
3. Search or scroll to nd the contact you are seeking and select to open.
4. When done, pull down the Notication Bar and select Current call.

NEC Terrain Specifications

General

Brand	NEC
Model	Terrain
Category	Cell Phone
Language	English