Netafim NMC-JUNIOR PRO - 7.13 System Nutrigation Check

NMC-Junior Pro Installation Manual
Page 46
SYSTEM CONFIGURATION PROCEDURE
2. Select the communication baud rate between controllers and the PC
7.13 System Nutrigation™ Check
• Check if EC/pH is on Target
• Water Run Time
• Start/Stop Valve
7.13.1 Check if EC/pH is on Target
1. Go to Program > Dosing.
2. Enter required amount of fertilizer to inject per dosing channel in l/m³ (USA: Gallon/1000 gallon)
3. Enter required target EC/PH levels.
7.13.2 Water Run Time
SYSTEM SETUP
Language
Temperature Unit
°C
Volume Unit
Metric
Maximum Cooling Parallel
1
Maximum Misting Parallel
1
STOP IRRIGATION
During Filter Flushing
No
During Cooling Process
No
During Misting Process
No
STOP DOSING
During Filter Flushing
No
SYSTEM SETUP
Main Screen
Default Hotkey Number
5
History
History Resolution
1 Hour
Weather Station
Controller Function
LOCAL
Operation Mode
Automatic return to RO mode
NO
Return period to RO mode
00:10
Communication
Controller Number
1
Port Protocol
NMC NET
Baud Rate
9600