NMC-Junior Pro Installation Manual
Page 71
2. Select 'Yes' to confirm your choice and start the relevant program.
3. When you enter the Start/Stop screen during irrigation you will be asked whether you wish to stop the active
program. Choose Yes to stop the program.
10.3 Start/Stop Valve
1. Enter a valve number, Run Time program and (optional) dosing program, press Enter to confirm and then press the
menu button to open the confirmation screen.
2. Select 'Yes' if you wish to start the relevant valve.
3. When you enter the Start/Stop screen and a valve is active you will be asked whether you wish to stop the relevant
valve. Choose Yes to stop the valve.
To Next Page
Loading...
