Chapter 3: Protecting Your Network | 47
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500 User Manual
Setting Times and Scheduling Firewall Services
The wireless modem router uses the Network Time Protocol (NTP) to obtain the current time
and date from one of several network time servers on the Internet.
Setting Your Time Zone
To localize the time for your log entries, you must specify your time zone:
1. L
og in to the wireless modem router at its default LAN address of http://192.168.0.1
with its default user name of admin and default password of password, or using
whatever password and LAN address you have chosen for the wireless modem router.
2. Select Sch
edule below Security to display the Schedule screen.
Figure 24.
3. Select your time zone. This setting is used for the blocking schedule according to your local
time zone and for time-stamping log entries.
Select the Adjus
t for Daylight Savings Time check box if your time zone is currently in
daylight savings time.
Note: If your region uses daylight savings time, you must manually select
Adjust for Daylight Savings Time on the first day of daylight savings
To Next Page
Loading...
Need help?
General
